Race Track Sticker - CADOURS LARÉOLE

The “CADOURS LARÉOLE” circuit layout and name as a cut decal: colour, size and cut direction of your choice.

For enthusiasts who have driven there or dream of it, here is the Cadours road circuit, in the Haute-Garonne, where Formula 2 and Formula Junior races were held from 1948 to 1961, and which comes back to life today during a classic car gathering. The layout and the circuit name are cut from mass-tinted vinyl, to apply on your car, your helmet, your toolbox or a window.

Contents

• 1 “layout + circuit name” decal CADOURS LARÉOLE

Good to know

• To choose when ordering: the colour (white, anthracite grey, silver grey, black or gold), the size (10 or 20 cm along the longest side) and the cut.
• “Positive” cut: applied on the outside, as in the photo. “Reversed” cut (inside glass): applied behind a window, from the inside, to read the right way round from outside.
• On a window, choose white or a light colour for good visibility.

At a glance

• STICK-IN reference: STK-500-015
• Vehicle(s): All vehicles and smooth surfaces (bodywork, window, helmet…)
• Colour: Anthracite (Charcoal / Graphite) / Black / Gold / Silver / White
• Length (longest): 10 cm | 4" / 20 cm
• Cutting: Inverted Pattern (windows: installation behind transparent glazing) / Positive Pattern (as pictured)
• Material: Cut vinyl, no background, colour all the way through: only the letters and shapes remain on the surface
• Transfer tape: yes, to position every element effortlessly
• Manufacturing: made to order in our workshop in France — shipped within 3 to 7 days (excluding Saturdays, Sundays, public holidays and annual closure)

Fitting tips

Clean and degrease the surface thoroughly (isopropyl alcohol or a mild degreaser), then let it dry: it must be clean, smooth and dry, ideally between 15 and 25 °C.

This decal is applied from the inside, on the inner face of the glass: it reads the right way round from outside.

Hold the decal in place with its clear transfer tape, adjust its position (a strip of masking tape makes a handy hinge), peel off the backing sheet, then squeegee from the centre outwards. Finally peel the transfer tape off slowly, folding it back flat on itself.

Avoid pressure washing for the first few days. Fitting instructions are included with every order.

Faithful reproduction made by STICK-IN, a French workshop specialising in car restoration decals since 2015. This is not an original manufacturer part: above all, we are enthusiasts.