Red “Kenzo” logo sticker for wing or tailgate – Renault Twingo 1 (2004-2007)

The red “Kenzo” logo of the Phase 4 Renault Twingo 1 Kenzo.

The last-generation Twingo Kenzo wears a red “Kenzo” logo on the tailgate and on the front wings, above the side repeaters. This decal reproduces it at the original dimensions.

Contents

• 1 red “Kenzo” decal

Good to know

• The car carries three of them (tailgate + 2 front wings): order 3 for the full set.
• The “Twingo” badge is not included: it is sold separately.
• Renault part numbers: 8200421522, 8200421520.

At a glance

• STICK-IN reference: STK-192-012
• Vehicle(s): Twingo 1
• Location: Bodywork - Front fenders
• Colour: Red
• Material: Cut vinyl, no background, colour all the way through: only the letters and shapes remain on the surface
• Transfer tape: yes, to position every element effortlessly
• Manufacturer part no. (for search): 8200421522, 8200421520
• Manufacturing: made to order in our workshop in France — shipped within 3 to 7 days (excluding Saturdays, Sundays, public holidays and annual closure)

Fitting tips

Clean and degrease the surface thoroughly (isopropyl alcohol or a mild degreaser), then let it dry: it must be clean, smooth and dry, ideally between 15 and 25 °C.

Hold the decal in place with its clear transfer tape, adjust its position (a strip of masking tape makes a handy hinge), peel off the backing sheet, then squeegee from the centre outwards. Finally peel the transfer tape off slowly, folding it back flat on itself.

Avoid pressure washing for the first few days. Fitting instructions are included with every order.

Faithful reproduction made by STICK-IN, a French workshop specialising in car restoration decals since 2015. This is not an original manufacturer part: above all, we are enthusiasts.