Tour de Corse Ragnotti stripe kit (1983-1984) – Renault 5 Turbo 1, Turbo 2

The complete livery kit of Jean Ragnotti's Renault 5 Turbo at the 1983-1984 Tour de Corse.

Driven by Jean Ragnotti, the Renault 5 Turbo in Renault Elf colours left its mark on the Tour de Corse. This kit reproduces all of its sponsor livery, from the bonnet to the rear bumper and the windscreen sun strip, to turn an R5 Turbo into a faithful replica.

Contents

• Bonnet: 1 “Renault Elf”
• Front wings: 2 “Elf” + 2 “Michelin”
• Doors: 2 “Magneti Marelli”, 2 “Facom”, 2 “Valeo”, 2 “Bilstein”
• Rear wings: 2 “europcar”, 2 “Elf”, 2 “Michelin”
• Boot: 2 “Elf”
• Rear bumper: 1 “Renault Sport”
• Roof: 1 Renault logo (2 parts to assemble at most)
• Windscreen: 1 white sun strip to trim around the seals + the “elf · Renault Sport · elf” lettering

Good to know

• Made to order only: please contact us before placing your order.
• The black lettering is cut, mass-tinted vinyl; the multicoloured logos (Facom, Valeo, Bilstein) are cut vinyl or laminated high-definition print.
• The yellow, black and white areas of the bodywork must be painted before fitting: the kit only includes the lettering and logos.
• Stickers visible in the photos but not in this list are not included; they can be added on request (at extra cost).

At a glance

• STICK-IN reference: STK-160-000
• Vehicle(s): Renault 5 Turbo (1 and 2)
• Location: Bodywork - Waistline & Body trim
• Colour: Multicoloured
• Material: Cut vinyl, no background, colour all the way through: only the letters and shapes remain on the surface
• Transfer tape: yes, to position every element effortlessly
• Manufacturing: made to order in our workshop in France — shipped within 3 to 7 days (excluding Saturdays, Sundays, public holidays and annual closure)

Fitting tips

Clean and degrease the surface thoroughly (isopropyl alcohol or a mild degreaser), then let it dry: it must be clean, smooth and dry, ideally between 15 and 25 °C.

Hold the decal in place with its clear transfer tape, adjust its position (a strip of masking tape makes a handy hinge), peel off the backing sheet, then squeegee from the centre outwards. Finally peel the transfer tape off slowly, folding it back flat on itself.

Avoid pressure washing for the first few days. Fitting instructions are included with every order.

Faithful reproduction made by STICK-IN, a French workshop specialising in car restoration decals since 2015. This is not an original manufacturer part: above all, we are enthusiasts.